• Basic dc accuracy 0.5%

• CAT III 600 V safety rated

• Diode and continuity test with buzzer

• Small lightweight design for one-handed use

• Rugged, durable design

• Automatic shutdown

• Battery is easy to replace

• Voltage, resistance, continuity, capacitance

• Input terminal for ac and dc current measurements to 10 A and current

• Data hold

• Voltage, resistance, continuity, capacitance

• Input terminal for ac and dc current measurements to 10 A and current

• Backlit display

• Data hold

• Diode test, plus frequency and duty cycle measurements

• 600 V Cat III safety rating

• 50% bigger display with bright white backlight

• Voltage, resistance, continuity, capacitance

• Input terminal for ac and dc current measurements to 10 A current

• Diode test, data hold

• 600 V Cat III safety rating

• 50% bigger display with bright white backlight

• Over-voltage indicator

• Frequency and temperature measurement

• Voltage, resistance, continuity, capacitance

• Input terminal for ac and dc current measurements to 10 A current

• Diode test, data hold

• Large white LED backlight to work in poorly lit areas

• Resistance and continuity

• Min/Max/Average to record signal fluctuations

• CAT III 600 V safety rated

Safety conformance

All inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV listed and VDE.

• 400 A ac current measurement

• Cat IV 300V / CAT III 600V safety rated

• 30 mm jaw size for numerous applications

• Resistance range of 4 kΩ

• Slim, ergonomic design is easy to carry and simple to use

• Easy to read backlight display

• 600 A ac current measurement

• Cat IV 300V / CAT III 600V safety rated

• 30 mm jaw size for numerous applications

• Resistance range of 40 kΩ

• Slim, ergonomic design is easy to carry and simple to use

• Easy to read backlight display

• 999.0 A ac current measurement

• Cat IV 300V / CAT III 600V safety rated

• 30 mm jaw size for numerous applications

• Resistance range of 40 kΩ

• Slim, ergonomic design is easy to carry and simple to use

• Easy to read backlight display

• Special 40A high accuracy AC/DC high measure, 1.6% accuracy, 0.01A resolution

• Small body and jaws fit perfectly in your hand and into tight places

• Large, backlit display is easy-to-see in less than ideal conditions

• In-rush current function (319) for measuring starting current for motors, lighting, etc.

• Measuring current Frequency (319)

• Resolution up to 0.01A and 0.1 V

• Measures AC/DC current to 1000 A (319)

• Measures AC/DC volts to 600 V

• Resistance measurement to 4000 Ω

• Continuity for quick checking of shorts

• Auto-shut-off maximizes battery life so the meter works when you need it

• Display hold function

• Slim, ergonomic design

• Large, easy to read backlight display

• CAT IV 300V/CAT III 600 V safety rating

• Hold button

• Two-year warranty

• Soft carrying case

• Thin, light, compact body design for one-hand operation

• 18mm triangular jaw allows for easy measurement on small cables

• Large, easy-to-read backlit display for easy viewing

• 200 A ac and dc current and 600 V ac and dc voltage measurement range

• 3000 Ω resistance range, continuity detection

• Zero function allows the display to be cleared for DC measurements

• Data Hold function

• CAT III 600 V safety rating

• iFlex flexible current probe (sold separately) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access

• CAT IV 600 V, CAT III 1000 V

• Propietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it

• Ergonomic design fits in your hand and can be used while wearing personal protective equipment

• Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement

• Three-year warranty

• Soft carrying case

• CAT III 600 V safety rating

• Insulation test range:

  • 1507: 0.01 MΩ to 10 GΩ

  • 1503: 0.1 MΩ to 2000 MΩ

• Insulation test voltages:

  • 1507: 50 V, 100 V, 250 V, 500 V, 1000 V

  • 1503: 500 V, 1000 V

• Save both time and money with Automatic calculation of Polarization Index and Dielectric Absorption Ratio (only available on the1507)

• Make repetitive tests simple and easy with the 1507’s Compare (Pass/Fail) function (only available on the 1507)

• Repetitive or hard-to-reach testing is easy with the remote test probe

• Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection

• Auto-discharge of capacitive voltage for added user protection

• AC/DC voltage: 0.1 V to 600 V

• 200 mA Continuity

• Resistance: 0.01 Ω to 20.00 kΩ

• Save battery power with auto power off

• Read measurements easily with large, backlit display

• CAT IV 600 V overvoltage category rating for added user protection

• Remote probe, test leads, probes and alligator clips included with each tester

• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work

• Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

• One year warranty

• Small in size easily fit in your pocket

• Laser targeting for fast, precise measurements

• Backlight display for easy reading in dark work areas

• 8:1 distance to spot ratios measures a 10 cm spot from 10 meters to target just what you want

• ± 2% basic accuracy gives you readings you can trust

• Precise laser technology for more accurate and repeatable measurements

• Large, easy-to-read backlit LCD display for easy viewing

• Small and lightweight design fits easily fits into your tool box

• 10:1 distance to spot ratio 

• IP40 rated for extra protection against airborne contaminants

• Displays the minimum, maximum or average temperature, or the difference between two measurements

• Hi and Lo alarms for rapid display of measurements outside the limits
  Powered by one (1) AA battery
  One year warranty

• Dust and water-resistant: IP54 rated for dust and water resistance.

• Rugged: 3-meter (9.8-foot) drop tested.

• Ergonomically designed: Completely redesigned for a more natural hand fit.

• Small and lightweight; clips to your tool belt or belt loop or easily fits into your tool box.

• Distance to spot: Precise laser technology makes for more accurate and repeatable measurements.

• Dual lasers: The 62 MAX+ has dual rotating lasers to help you identify area to be measured. The measurement area is the spot between the dots.

• Large, backlit display: Large screen makes data easier to read, even in dark areas.

• Min/Max/Avg/Dif: Displays the minimum, maximum or average temperature, or the difference between two measurements.

• Alarm: Hi and Lo alarms for rapid display of measurements outside the limits.

• Power: Both the 62 MAX and 62 MAX+ are powered by a single, standard AA battery.

• Voltbeat™ technology and continuous self-test — so you always know it’s working

• Upon detection, tip glows and beeper sounds

• CAT IV 1000 V for added protection

• Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model

• 20 V to 90 V AC control circuit model also available

• Two-year warranty

• Voltage detection from 90 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.

• NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.

• NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*

• Category IV – 1000 V overvoltage rated product for best in class user protection

• Integrated clip design, optimized for pocket storage

• Powered by 2x AAA batteries (included)

• Fluke ruggedness and reliability

• Two-year warranty

• Dual Sensitivity

• LED light with 100,000 hour life

• Detects from 90 to 600 V AC

• Rated to CAT IV 600 V

• Dual Levels of Detection

• Blue indicates proximity to AC Voltage source

• Red indicates you’re at the source

• Operating temperature 0 deg C to 50 deg C

• Ultra-Bright White LED

• 100,000 hr bulb

• AAA battery included

• Backlit LCD display for easier viewing

• Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting

• Resistance (Ohms) to 9.99 kOhms

• Rotary Field Indication

• Display Hold for easier viewing in hard-to-test areas

• 3 forms of AC/DC voltage indication: light, sound, and vibration for added user protection and convenience

• Detect live voltage even when the batteries are dead

• Extra heavy-duty, replaceable test leads for more flexibility and durability

• CAT IV 600 V, CAT III 1000 V rated for added user protection

• Bright LED flashlight for work in poorly lit areas

• The most advanced laser technology for distance measurement
  Simple one-button operation to instantly measure distance between two objects

• Measures up to 50 m (165 ft) with accuracy of 2 mm (0.08 in)

• Bright laser for easy targeting even at longer distances

• Quick calculation of area (square feet/meters) and volume

• Easy addition and subtraction function

• Pythagoras function indirectly measures height via two other measurements

• Stores up to five measurement results

• Battery life of 3000 measurements with automatic shut-off feature

• Two-line display with display hold (until next button is pressed)

• Carrying pouch secures to your tool belt

• Powered by two AAA batteries

• Measure up to 80 m (260 ft)

• Higher accuracy: +/-1 mm (0.04 in)

• View more data with backlit, three-line display

• Full Pythagoras function for height measurements

• Storage of 20 complete displays for quick recall

• Audible keypad feedback

• Minimum/Maximum function

• Tripod mode for mounting meter on a tripod when measuring long distances

• Stake Out feature helps you mark out defined lengths such as when constructing wooden frames

• Automated End-piece Correction for measuring from an edge or corner --a built-in sensor detects the position of this bracket and automatically changes the reference point.

• Enhanced environmental protection:IP54-rated as dust and water spray resistant

• Improved battery life of 5000 measurements with auto laser off and auto power off features.

Fluke 9062

• 3 phase indication

• Indication of phase rotation

• Indication of motor rotation direction

• Contact free determination of the rotation direction of running motors

Fluke RLD2 

• Six UV LEDs (395 nm wavelength) detect leak detection dyes

• Laser pointer clearly locates center of the UV field for accuracy

• Three LED flashlight with 100,000 hour LED life

• Operating temperature 0 ° C to 50 ° C

• Four operating modes: flashlight, UV light, laser light, UV/laser light combination

• Convenient detachable key chain carabiner and AAA battery included

Fluke 1621

• 3-pole Fall-of-Potential earth testing for basic measurements

• 2-pole resistance measurements for added versatility

• Easily capture values with single-button operation

• Ensure accurate measurements with automatic ‘noise’ voltage detection

• Hazardous voltage warning offers increased user protection

• Clearly read and record data with a large, backlit display

• Rugged holster and design for tough work environments

• Portable size allows for easy transportation

• Instantly be alerted to measurements outside of your set limit, when you use the adjustable limit setting

• 600 V Cat II

Fluke VT04

• Visual image and infrared heat map blending - Identify the exact location of the potential issue by blending the visual image with the heat map overlay at 0%, 25%, 50%, 75%, and 100% infrared with one button

• NEAR and FAR mode - Align the visual and thermal lenses to correctly identify the location of the issue

• Center measurement box - See the exact area of temperature measurement right on the screen

• Temperature alarms and automated monitoring features - Identify intermittent problems by monitoring equipment over time or get alerts when a temperature is outside the expected range

• Hot and cold markers - Instantly identify hottest and coldest spots within the field of view
  Save in .bmp or .is2 format - Choose .bmp when all you want is the image, or use .is2 format that can be edited in SmartView® software

• SmartView® reporting software - Optimize the image blending and palette and quickly create professional reports

• Pocket-size design - Handy when you need it; easily fits in your tool bag or pocket

• Intuitive interface - Get to work as soon as you take it out of the box

• Hard or soft case - Protect your visual IR thermometer with a soft case (VT04A) or hard case (VT04)

• Battery choices - Choose your preferred way of powering your visual IR thermometer: 4 AA batteries (VT04A) or a rechargeable Li-ion battery (VT04)