Motwane Electrical Instrument

LR2045 BENCH TOP AC MAINS OPERATED 4 1/2 DIGIT MICRO-OHM METER SUITABLE FOR RESISTIVE LOAD

  • Pulse mode operation, for protecting heat sensitive devices

  • Data Logging possible with RS232 interface

  • Soft touch keys for smoother operation

  • Cheap & portable

LR2045-S BENCH TOP AC MAINS OPERATED 4 1/2 DIGIT MICRO-OHM METER SUITABLE FOR INDUCTIVE LOAD

  • Back-Emf Protection

  • Specially designed with safety concerns

  • USB Interfacing with .Net based application Software

  • Pulse mode operation, for protecting heat sensitive devices

  • Stable readings on resistive as well as inductive loads One Man Operable & Portable

1 / 4

Please reload

HV50 HIGH VOLTAGE DETECTOR

  • SELF TEST button to test battery and proper functioning of HV detector.

  • Selectable sensing level 1m/3m/5m for HV-D 50/ HV-D 132/ HV-D 220/ HV-D 440

  • Powered by a single 9V Battery type (6F22), Easily replacement on field.

  • Type tested at CPRI.

PRIMARY INJECTION KIT - (PIK) CURRENT RANGE FROM 100A TO 3000A

  • Single compact unit equipment for easy operation

  • Designed to offer continuously variable output current

  • Built in Digital Timer for measuring tripping time

  • Adequate MCB protection from overloads

  • Customization as per customer’s requirements.

SECONDARY INJECTION KIT - (SIK) RELAY TEST SET (RTS)

  • Single compact unit equipment for easy operation

  • Designed to offer continuously variable & selectable output current

  • Built in Digital Timer for measuring tripping time

  • Adequate fuse protection from overloads

  • Customization as per customer’s requirements.

OIL TEST SET OIL BREAKDOWN TESTER

  • Fully automatic microprocessor based kit

  • Preprogrammed test sequence as per IEC 60156 / IS6792/ASTM

  • Customized preprogrammed test sequences available

  • Large LED display with touchpad for alphanumeric data entry

  • Up to 100 test results storage facility

HV TEST SET (MOT-HTS) 111 HIGH VOLTAGE TEST SET

  • Equipment with compact units for above easy operations

  • Designed to offer continuously variable output voltage

  • Various models for AC, DC, & AC/DC voltage

  • Fast acting over current protection for overloads

  • Customization as per customer’s requirements.

Please reload

XTRM3 TRANSFORMER TURNS RATIO METER XTRM-3

  • Fully automatic, no manual balancing required.

  • Testing single phase and three phase transformers.

  • Detection of Transformer Vector Group

  • Calculation of Ratio error

  • Isolates test voltage automatically after test.

Please reload

CLAMP MULTIMETER

DCM23A AC CLAMP METER

  • Average, 3 1/2 digit ( 2000 counts)

  • 600V AC/DC & Up to 400A AC

  • Temperature measurement

  • 23mm clamp jaw size

  • Low Overload indication ‘OL’

DCM33A 1000A AC CLAMP METER

  • Average, 3 3/4 digits ( 4000 counts),

  • 1000V AC/DC & Up to 1000A AC

  • 55mm clamp jaw size

  • Capacitance / Diode / Continuity / Frequency Testing

1 / 4

Please reload

I-12 1 KV DIGITAL INSUTESTER WITH 2 G? MEASUREMENT RANGE

  • NO-GO test facility.

  • Pre selectable Timer facility, Mains Eliminator.

  • Selectable voltage facility 50,100,250,500 &1000V.

  • Insulation resistance range up to 2 GOhm Auto AC/DC 600V measurement.

  • Live circuit detection up to 600V AC/DC.

IT-51 5 KV DIGITAL INSULATION TESTER WITH PI

  • Selectable test voltage from 250V, 500V, 1000V, 2500V, 5000V DC.

  • Insulation Resistance measurement up to 1 TOhm

  • Polarization Index measurement facility Short circuit current < 1.4 mA. approx.

  • AC/DC voltage measurement up to 600V.

  • Two Programmable timer from 0 Sec to 99 minutes.

IT-250G 5KV DIGITAL INSULATION AND CONTINUITY TESTER DIGITAL INSULATION TESTER

  • Most comfortable ergonomics with strap.

  • Selectable test voltages from 250V, 500V,1000V,2500V,5000VDC.

  • Insulation Resistance measurement up to 250G Ohm.

  • Continuity measurement.

  • Programmable timer from 1 sec .to 99 minutes.

1 / 3

Please reload

DECT2 DIGITAL EARTH CLAMP TESTER

  • Simple, Time saving & Valuable

  • Measures earth resistance in 1 Second

  • Forget conventional method of isolation of earth pits for measurement

  • "Stakeless testing", saves time in measuring earth resistance of mesh earth pits

DECT3 DIGITAL EARTH CLAMP TESTER WITH LEAKAGE CURRENT MEASUREMENT

  • Does not require breaking down grounding wire and need no auxiliary electrode

  • Long Jaw size: 65 X 32 mmØ - The unique long Jaw is particularly suitable where grounding is done by flat steel or copper strips

  • Resistance measurement range: 0.01Ohm to 1200 Ohm

  • AC Leakage Current measurement range: 0 to 20A

  • RS 232 interface for monitoring, uploading , analyzing and printing of data

DET20 20/200/2000 Ω 4 TERMINAL RECHARGEABLE BATTERY OPERATED EARTH & SOIL RESISTIVITY TESTER

  • Designed with new RSR Technology

  • 100% consistency even at low battery & noisy conditions

  • 4 terminal soil resistivity measurement

  • Earth voltage measurement

  • 3 terminal / 4 terminal measurement method

Please reload

 
 
 
 
 
 

MANISHA

TOOLS & INSTRUMENTS

© 2017 by The Manisha Tool & Instruments

  • Grey Facebook Icon
  • Grey Twitter Icon
  • Grey Google+ Icon
  • Grey YouTube Icon
  • Grey Pinterest Icon
  • Grey Instagram Icon

Contact

NISHA CHANDRA NIVAS,
BALASHRAM LANE, MADHUPATNA
CUTTACK - 753010, ODISHA, INDIA

Tel.: +91-671- 2342680

info@manishatool.com